Ultrasonic frequency induction heating machine

Short Description:

IGBT inverter used,high efficiency and low energy consumption

Can work continuously with 100% duty cycle and set up 100% at any load

Can replace convention heating method such as heating by flame coal salt bath gas and oil

Work frequency 10-30Khz,power 30-250KW

Digital display and compact design,light weight,easy for installation and operation

Soft switch technology and prefect protection system enhance good reliability.

Can equipped with infrared temperature detection system (Optional)

Water cooling system ,chiller is available


Product Detail

Product Tags

Ultrasonic induction heating equipment

IGBT inverter used,high efficiency and low energy consumption

Can work continuously with 100% duty cycle and set up 100% at any load

Can replace convention heating method such as heating by flame coal salt bath gas and oil

Work frequency 10-30Khz,power 30-250KW

Digital display and compact design,light weight,easy for installation and operation

Soft switch technology and prefect protection system enhance good reliability.

Can equipped with infrared temperature detection system (Optional)

Water cooling system ,chiller is available

The benefit of annealing with induction heating:

Model SSF-30 SSF-50 SSF-60 SSF-80 SSF-120 SSF-160
Rated Power Output 30KW 40KW 60KW 80KW 120KW 160KW
Working Frequency 10-30KHz 10-30KHz 10-30KHz 10-30KHz 10-30KHz 8-15KHz
Power Capacity 38KVA 50KVA 75KVA 100KVA 150KVA 200KVA
Input Power 380V/50Hz or 400V 3 phase 4lines
Working Voltage 342V-430V
Input Current 48A 63A 97A 135A 195A 240A
Cooling/Water /Flow Power Unit 27L/min 32L/min 40L/min 33L/min 56L/min 56L/min
(0.1Mpa) (0.1Mpa) (0.1Mpa) (0.1Mpa) (0.1Mpa) (0.1Mpa)
Transformer 26L/min 29L/min 41L/min 32L/min 68L/min 68L/min
(0.1Mpa) (0.1Mpa) (0.1Mpa) (0.1Mpa) (0.1Mpa) (0.1Mpa)
Weight Power Unit 39KG 60KG 68KG 99KG 130KG 140KG
Transformer 29KG 34KG 53KG 63KG 88KG 120KG
Dimension

(mm)

Power Unit 365*500*790 405*505*860 400*540*970 750*500*1040 550*600*1380 550*600*1380
Transformer 320*320*310 320*360*310 410*470*385 410*470*385 405*555*380 810*410*440

Application

For bar end or head preheat before hot forging for bolt nut and fastener  produce,below table for reference only

Diameter(mm) Heating length(mm) Production/Min Machine model
16 40 15-20 SSF-30
18-20 40 15-20 SSF-50
22-24 50 15-20 SSF-60
27-30 50 15-20 SSF-80
32-40 50 15-20 SSF-120

Hardening:For gear shaft pin or other metal parts heating,need to know hardness and depth

Brazing long bar thread bar heat treatment

Pipe heating for elbow produce,hot bender

Why choose us?

1  More than 20 years of experience in induction heating industry
2  Free test for choosing the machine model before purchase
3  Product design research develop and maintain by the Duolin Engineer team,machine lifetime service
4  Test the machine as customer heating requirements and aging more than 6 hours to guarantee the good quality
5  Offer installation manual and troubleshooting guide
6  Use famous brand components Infineon Omron Schneider to ensure quality of material


  • Previous:
  • Next:

  • Write your message here and send it to us
    -->